Can leds really save money?
Date: 2021-03-25 01:33:04 Hits: 102

1. Energy efficiency: only a few kilowatt hours of electricity! An ordinary 60-watt incandescent lamp consumes 1 kilowatt-hour for 17 hours, and an ordinary 10-watt energy-saving lamp consumes 1 kilowatt-hour for 100 hours. ULTRA-LONG LIFE: Semiconductor, chip light, no filament, no glass bulb, not afraid of vibration, not easy to break, service life up to 50,000 hours (ordinary incandescent lamp service life only 1,000 hours, ordinary energy-saving lamp service life only 8,000 hours)

3. Healthy Light: The light does not contain ultraviolet and infrared rays, do not produce radiation! Ordinary light contains ultraviolet and infrared rays. Environmentally friendly, free of harmful elements such as mercury and Xenon, conducive to recycling and, and will not produce electromagnetic interference (ordinary lamps contain mercury and lead elements, energy-saving lamps in the Electrical ballast will produce electromagnetic interference)

5, protection of vision: LED energy-saving lamps using DC drive, no STROBOSCOPIC (common lamps are AC driven, stroboscopic)

6. High Light Efficiency: LED energy-saving lamps generate less heat, and 90% of the electric energy is converted to visible light (80% of the electric energy of ordinary incandescent lamps is converted to heat energy, only 20% to light energy)

7. High Factor of safety: The required voltage, current is small, heating is small, do not produce safety hazards, in mines and other dangerous light-emitting diode: generally, long feet for the positive. When measuring with a Stylus, note the distance between the two feet of the diode. If the meter is reading, then the Red Stylus is measuring the positive pole of the diode and the light-emitting diode will glow, if the meter is not counted, the light-emitting diode is damaged. ZENER DIODE: one end with a black ring is negative. When the meter is used, if there is indication, the end of the red meter is positive and the end of the black meter is negative; if not, the reverse is measured again. If two measurements are not indicated, that the Zener diode has been damaged. RECTIFIER DIODE: With a white ring for negative. When the meter is used, if there is indication, the end of the red meter is positive and the end of the black meter is negative; if not, the reverse is measured again. If both measurements are not indicated, the rectifier diode is damaged

Message board

min&max

LEAVE A MESSAGE
Newell Lighting

Scan The QR Code to add NEWELL on WeChat