Newell Lighting: Explosion-proof 3C certified LED explosion-proof lights
Date: 2020-04-11 00:36:07 Hits: 203

The full name of CCC certification is "China Compulsory Product Certification", which is to compulsorily test and audit products listed in the compulsory product certification catalog by formulating a compulsory product certification product catalog and implementing mandatory product certification procedures. Without obtaining the certification certificate of the designated certification body, and without applying the certification mark in accordance with the regulations, it shall not be imported, sold out of the factory or used in business service places.


LED explosion-proof lights

According to the requirements of Circular 34 of the General Administration of Market Regulation 2019, from October 1, 2019, explosion-proof electrical products will be included in the scope of CCC certification management. Before October 1, 2020, the above products produced by domestic enterprises should be shipped, sold or used in other business activities with a valid production license or CCC certification. For enterprises that have obtained production licenses, if the above products do not continue production after October 1, 2020 (inclusive), there is no need to apply for CCC certification; otherwise, they should submit a certification commission as soon as possible and before October 1, 2020 Obtained CCC certification.


LED explosion-proof lights

How do explosion-proof electrical production enterprises obtain CCC compulsory certification?


1. How can an enterprise that has obtained an explosion-proof electrical production license obtain CCC (hereinafter referred to as 3C) certification?


Starting from October 1, 2019, companies that have obtained explosion-proof electrical production licenses will submit applications, relevant certificates and reports and other materials, which can be converted free of charge after the materials have been reviewed and approved.






Precautions:


1. The conversion period is from October 1, 2019 to October 1, 2020


2. Conversions that are not completed before October 1, 2020 will be terminated.


3. Finance is only responsible for the expenses incurred before the conversion of the certificate.


2. Why do explosion-proof electrical appliances need to be certified by 3C? What impact does it have on the explosion-proof electrical industry?


From October 1, 2019, explosion-proof electrical appliances will be included in the scope of 3C certification management.


Since October 1, 2020, explosion-proof electrical appliances have not obtained a compulsory product certification certificate and are not marked with a compulsory certification mark, and may not be shipped, sold, imported or used in other business activities.


3. What products are included in the mandatory 3C certification catalog for explosion-proof electrical products?


1. Explosion-proof motor;


2. Explosion-proof electric pump;


3. Explosion-proof power distribution device products;


4. Explosion-proof switch, control and protection products;


5. Explosion-proof starter products;


6. Explosion-proof transformer products;


7. Explosion-proof electric actuators and solenoid valves;


8. Explosion-proof plug-in device;


9. Explosion-proof monitoring products;


10. Explosion-proof communication and signal devices;


11. Explosion-proof air-conditioning and ventilation equipment;


12. Explosion-proof electric heating products;


13. Explosion-proof accessories, Ex components;


14. Explosion-proof instruments and meters products;


15. Explosion-proof sensor;


16. Safety barrier products;


17. Explosion-proof instrument box.


4. What is the process of applying for explosion-proof 3C certification?


1) Certification application and acceptance


This is the beginning of the certification process. The applicant submits a formal written application to the designated certification body, submits technical documents and certification samples in accordance with the certification implementation rules and the requirements of the certification body, and signs relevant agreements with the certification body on related matters (may also be combined with the application). Applicants for certification can be producers, importers and sellers of products. When the applicant is not the producer of the product, the applicant shall sign relevant documents with the producer of the product on the implementation of certification, and make arrangements for such matters as document review, sample testing, factory inspection, logo use and post-certification supervision. The applicant can also entrust an agent to apply for certification, but the agent must obtain the registration qualification of the National Accreditation Administration.


2) Type test


The type test is the core link of the certification process. When the product is a special product such as a chemical product, the type test will be replaced by a sample test. The type test is carried out by the designated testing agency in accordance with the certification implementation rules and the requirements of the certification agency. In special cases, such as large products and difficult transportation, the type test can also be arranged by the certification body in accordance with the requirements of the CNCA to use the resources of the factory. In principle, one type of test report per unit is required for type testing, but for the same product of the same applicant and different production sites, only one test is required.


3) Factory inspection


Factory inspection is an important link to ensure the validity of certification. Factory inspection is carried out by the certification body or designated inspection body in accordance with the requirements of the certification implementation rules. The factory inspection includes two parts, one is the consistency inspection of the product, including the verification of the product structure, specifications, important materials or parts, and the other is the inspection of the factory's quality assurance ability. In principle, the factory inspection will be carried out after the completion of product testing. In special cases, according to the requirements of the applicant, the certification body can also arrange for factory inspections in advance, and make appropriate arrangements for the inspection man-days as needed. For factories that have obtained management system certifications from authorized certification bodies, the review of the system part of their quality assurance capabilities can be simplified or eliminated.


4) Sampling test


Sampling test is a part of the product design that is not suitable for type testing and when the factory inspection questions the consistency of the product. For the convenience of the enterprise, the sampling is generally arranged at the factory inspection, or it can be sent in advance according to the applicant's requirements. Sampling and conducting factory inspection after passing the test.


5) Evaluation and approval of certification results


The certification body shall evaluate based on the results of testing and factory inspection, make a certification decision and notify the applicant. In principle, the time from the date when the certification body accepts the certification application to make the certification decision does not exceed 90 days.


6) Supervision after certification.


In order to ensure the continuous validity of the certification certificate, the certified products are arranged to be supervised after certification according to the product characteristics, and detailed regulations are made in the certification implementation rules. It is worth mentioning that the post-certification supervision includes two parts, namely product consistency review and factory quality assurance capability review.


V. Explosion-proof electrical 3C certification costs?


1. The application fee is 500 yuan / unit.


2. Product testing fee: different product fees will vary.


3. Factory inspection fee: 3000 yuan / toll day, toll day = factory inspection day + toll passer day.


4. Approval, registration and certificate fees are 1,000 yuan / unit.


5. Annuity: 100 yuan / unit.


6. What are the requirements for obtaining an explosion-proof 3C enterprise?


The business license, qualified products and related technical information, venue, personnel, equipment and system within the validity period meet the requirements of 3C on-site review.


7. How long does it take to obtain 3C certification?


It takes about 5 working days to apply, about 30-50 working days for product inspection, and about 90 working days for the initial factory inspection (excluding rectification time when problems occur).


8. What is the validity period of the explosion-proof 3C certificate?


The certificate is valid for 5 years. During the validity period, the validity of the certificate depends on the post-certification supervision of the certification body. If the validity period of the certificate expires and it is necessary to continue to use it, the certification client shall submit the certification commission within 90 days before the validity period of the certification certificate expires. If the supervision result is qualified after the last certification within the validity period of the certificate, a new certificate will be issued directly after receiving the certification entrustment.


9. Does the explosion-proof 3C need to be reviewed every year?


After the production enterprise obtains the certificate for the first time or after the initial factory inspection, in principle, at least one follow-up inspection shall be carried out every natural year. It depends on the type of enterprise.

Message board

min&max

LEAVE A MESSAGE
Newell Lighting

Scan The QR Code to add NEWELL on WeChat