Led classification of industrial and mining lamps and products introduction
Date: 2016-07-06 13:52:30 Hits: 562

Led industrial and mining lamps, that is, lamps used in the production areas of factories and mines. Industrial and mining lamps, in addition to the usual lighting used in the environment, there are special environments used in explosion-proof lamps and corrosion protection lamps, as well as industrial and mining lights for some large high-rise buildings. According to the

lighting function can be divided into two kinds of general lighting and local lighting.

general lighting usually are evenly arranged in the above or the side wall of the work site, lighting the entire face, need to use high-power incandescent lamp, halogen lamp, high intensity discharge lamp or number of fluorescent lamps, of course, there are more energy-efficient high-power LED mining lamp, most mining lamps are such. The general illumination lamp has the higher request to the light distribution, widely uses the direct illumination type and the semi direct illumination type two kinds of light distribution, especially latter. A part of the semi - direct illumination illuminates the ceiling, increasing the brightness of the ceiling and creating a more comfortable and brighter environment.

local lighting is a lamp illumination a part. The utility model can strengthen and supplement illumination on the basis of general illumination, or can be used as temporary lighting in places where lighting is not needed at ordinary times (such as equipment maintenance and maintenance). Most of their light distribution is not strictly defined. Local lights are usually located near the work area, using incandescent lamps and halogen tungsten lamps as light sources to use safe, ultra low voltage (&le, 50V, AC RMS). A (mobile) line lamp, hanging lamp, table lamp, lamp, machine work. In some tall buildings, the light is sometimes used as part of the illumination.

Message board


Newell Lighting

Scan The QR Code to add NEWELL on WeChat