LED mining lights - should be universal knowledge
Date: 2016-07-06 11:32:02 Hits: 315

Led mining lights - - should be popularized; lamps used in factories, mines, and production areas. In addition to the usual lighting used in the usual environment, industrial and mining lamps also use explosion-proof lamps and anti-corrosion lamps in a specific environment.

type mining lamp according to the lighting function can be divided into two kinds of general lighting and local lighting.

general lighting usually are evenly arranged in the above or the side wall of the work site, the whole face lighting, fluorescent lamps require the use of larger power incandescent lamp, halogen lamp, high intensity discharge lamp or number. The vast majority of industrial and mining lights are of this kind. The general illumination lamp has the higher request to the light distribution, widely uses the direct illumination type and the semi direct illumination type two kinds of light distribution, especially latter. A part of the semi - direct illumination illuminates the ceiling, increasing the brightness of the ceiling and creating a more comfortable and brighter environment.

local lighting is a lamp illumination a part. The utility model can strengthen and supplement illumination on the basis of general illumination, or can be used as temporary lighting in places where lighting is not needed at ordinary times. Most of their light distribution is not strictly defined. Local lights are usually located near the work area, using incandescent lamps and halogen tungsten lamps as light sources to use safe, ultra low voltage (&le, 50V, AC RMS). A (mobile) line lamp, hanging lamp, table lamp, lamp, machine work. In some tall buildings, the light is sometimes used as part of the illumination.

requirements in order to meet the needs of visual and lighting installation conditions of different production operations, reflector mining lamp should be able to produce various degrees of light distribution width. The surface coating, glaze to appear white, and made of aluminum, glass mirror, prism glass and other materials are light reflector, wide distribution, suitable for large area and working face of vertical workplace. For large buildings and large machine tools which need to be individually illuminated, reflectors with prismatic, glass and polished aluminum can be used to achieve narrow beam distribution.

in dust and damp conditions such as poor places in the long-term, reliable work, mining lamps have special requirements in structural design, shell and reflector etc.. Environmental dust should be used in closed lamps or directed convection lamps on the light (see photo); surface treatment should pay attention to the tightness of the shell and the reflector in a humid environment; indoor common open lamp, the reflector, the surface of enamel alumina thick film or aluminum reflector coated with silicon dioxide protective film; taking into account the inevitable production sites in shock, fixed light source should adopt the anti loosening holder.




Message board

min&max

LEAVE A MESSAGE
Newell Lighting

Scan The QR Code to add NEWELL on WeChat