Maintenance methods of LED industrial and mining lamps
Date: 2017-04-21 10:14:11 Hits: 578

Does the LED industrial lamp need maintenance? How should I maintain it? As one of the family of LED lamps, LED industrial and mining lamps are frequently used in industry. Its safety and effectiveness have been favored by major industrial enterprises. Although the life of LED lamps is very long, the service life of lamps and lanterns can be increased if the lamps and lanterns can be maintained and maintained well. How to make scientific

LED lamp maintenance work?

1, buy Lamps, do not install, should carefully read the installation instructions, and then follow the installation instructions in accordance with good lighting, otherwise there may be danger; structure of

2, in a clean maintenance when do not change the lamp, also do not arbitrarily change the lamp parts, in the maintenance, as is the lamp should be installed, do not missing, wrong with lamp parts; switch

3, in the use of lamps, try not to frequent, although the number of LED light switch resistance is about 18 times the ordinary fluorescent lamp, but too frequently will affect the life of the LED lamp internal electronic components, thus affecting the service life of the lamp;

4, in particular, in addition to the special LED lamp, LED lamp should avoid the use of common in moist environment. Wet environment will affect the LED lamp drive power electronic components, electronic components damp, lamp life shortened.

therefore, moisture is the key to lighting maintenance, especially the stove headlight LED lamp and kitchen and bathroom, bathroom, must be installed to prevent moisture intrusion proof lamp, avoid corrosion damage or leakage circuit;

5, finally, the LED lamp is best not to use water to wash, as long as the dry cloth wet wipe. If you accidentally hit the water to dry, should not turn on the lights after immediately with a damp cloth to wipe.

Message board


Newell Lighting

Scan The QR Code to add NEWELL on WeChat